Easy Laptop RAM Upgrade Guide

Easy Laptop RAM Upgrade Guide
Expandable RAM as seen on the Framework Laptop.

Easy Laptop RAM Upgrade Guide

Is your trusty laptop feeling a little slow lately? Do you feel overwhelmed when there are too many tabs open? Upgrading your RAM could be the solution.

RAM, or random access memory, plays a crucial role in your computer’s performance. When you run out of physical memory, you start swapping data on your hard drive, which drastically slows down processes. Here’s how to upgrade your laptop’s RAM and how to install it yourself.

Install RAM on your new laptop

As long as you follow the instructions carefully, you can install new RAM in your laptop yourself without any advanced technical knowledge. However, before you begin, go to the end of this article to learn more about how to check your RAM usage, how to tell if your laptop can be upgraded, and how to select the right type of RAM.

It should be noted that the interior of the laptops is varied in terms of design. The following steps are general tips that should apply to most laptops, although the details will vary from computer to computer.

  1. Turn off your laptop and make sure it is disconnected from any power source.
  2. Turn your laptop over so you can identify and unscrew the screws that will allow you to remove the motherboard.
  3. SODIMM memory cards are usually held in place with clips. Locate them and remember to hold the RAM by the edges instead of covering the gold connectors.
  4. Remove the old RAM from your laptop by releasing the clips that hold the RAM in place.
  5. Insert the new RAM holding it by the sides at an angle; the pins should be aligned with those in the slot.
  6. Firmly press the new RAM until it snaps into place under the clips.
  7. Replace the motherboard and screw it back on.
  8. Turn on your laptop and navigate to Settings > System > About. Here you should see the total amount of RAM installed. If it is incorrect, you will need to repeat the steps above to reset the RAM.

Easy Laptop RAM Upgrade Guide

Check your current RAM usage

Those are the basic instructions, but there’s a lot more to know before you go out and buy new RAM units. Start by checking your laptop’s memory usage. With your most demanding workload open and running, open Windows Task Manager to see if you need more. Here’s how to open it:

  • Right click on the taskbar.
  • Select Task Manager.
  • Click on the Performance eyelash.
Read Also :  OMAZE UK: The US Innovative Fundraising Startup

Here you can see how much memory is being used compared to the total amount of RAM available. If you are approaching the limit, upgrading could significantly improve performance.

Find out if you can upgrade

Next, you need to know if it is possible to upgrade your laptop’s RAM. Not all laptops allow RAM upgrades; some have sealed backs or soldered memory. If you have a recent MacBook or other compact laptop, for example, you’re probably out of luck.

You can use tools like Crucial Memory Advisor or consult your laptop’s documentation to determine if an update is possible. Identify the type and speed of RAM your laptop supports (DDR2, DDR3, DDR4, or DDR5) and the maximum capacity. If you can access your memory, you’ll be ready.

Buy RAM that is compatible with your laptop

Now that you know the type and speed of RAM your laptop can support, it’s time to buy that RAM for your laptop. While you don’t need to buy a pair of corresponding memory cards, dual-channel RAM offers higher performance. It also eliminates any potential compatibility conflicts.

You can purchase RAM to upgrade your laptop from the manufacturer’s website or through online retailers like Amazon or Best Buy.

Leave a Reply

Your email address will not be published. Required fields are marked *

Previous Post
Secure Your Future with Whole Life Insurance Quotes

Secure Your Future with Whole Life Insurance Quotes

Next Post
Entrepreneur’s Guide to Mastering Business Loans

Entrepreneur’s Guide to Mastering Business Loans